Quantcast
Channel: All Notebook Boot and Lockup posts
Viewing all 131931 articles
Browse latest View live

Press esc key for start up menu

$
0
0

1- Notebook shut down at almost the end of the re-installing windows 7 32bit

2- Tried to turn on the computer but got stuck at HP logo and press esc key for start up menu, won't even open BIOS.

3- Pressing any keys won't do anything except beeping after a while

4- Removed HDD and tested it on another laptop: works just fine

5- Can go to BIOS while the HDD is not connected

6- Removed ram sticks, tried 1 by 1: nothing changed. Changed slots: nothing changed.

 

Any help will be appreciated.


Re: Unable to boot a BIOS update from USB drive

$
0
0

Normally, you should be able to boot from a USB flash drive without changing any BIS settings, but sometimes you have to.

 

The only suggestion I can offer would be to go into the BIOS, and enable Legacy mode.

 

That should allow you to boot from a USB flash drive or a DVD.

 

See this link for more information...

 

https://www.support.hp.com/us-en/document/c03736054/

Re: Bios default password is unknown

$
0
0

Hi:

 

Restart the PC, and enter this unlock passcode...11945829

 

 

Re: HP Spectre x360 not turning on

$
0
0

Hello,

Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue. 
To be more helpful with your post, you can add key information if you desire: 
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about forum posting, please feel free to send me a private message!

Thank you

HP SureStart - Locked out

$
0
0

I am using HP SureStart on my ZBook, it was working fine since last night. I ran a few windows updates and now the surestart program does not recognize my fingerprint nor my passwords. I am completely locked out of my notebook and I need it for school.

Laptop won't run on battery

$
0
0

I put a new battery in our laptop in June and it has worked fine, either plugged in or on battery, until today.  Now, it will not boot up on battery alone.  If it's plugged in, it works fine but when I pull the power cord to work on battery alone, it instantly shuts down.  I ran the HP battery test and it came back saying "the battery hasn't been charged lately"...."available battery power is 100%".  It can't be both!  Any thoughts?  Thanks.

Re: HP Elite x2 1012 G1 Tablet , need to unlock bios password

$
0
0

 wrote:
  1. Product Name : HP Elite x2 1012 G1 Tablet
  2. Product Number : 1LU13PC
  3. Serial Number :  5...W
  4. UUID :    9A843DA1-38DF-11E6-A082-4A0C7201802C   
  5. BIOS Version :     N85 Ver.01.14   04/26/2016       

 i have laptop HP  Elite x2 1012 G1 Tablet bios password locked  . I want to unlock it

i used the smc .bin file  to unlock BUT no success , i don't undestand the cause i fail

  Let give me  Any advice  . Thanks Advance   _>.<_

 


please help me

Re: Bios default password is unknown

$
0
0

It worked! thank you so much for your time and help. 


Re: HP EliteBook 840 G5 GRUB MBR

$
0
0

@WAWood

Yes, I also know that HP often provides a rescue CD in the package but what I do not know is that that changed so that they now only provide a Windows-based utility. The fact that rescue CDs are history is news to me, so thank you for updating my knowledge there.

 

Besides that, in the meanwhile I actually posted my problem on the Debian User Forums and they, as expected, could not provide me any HP files. Regardless of that, they were able to offer me a very "linux-like" solution:

 

http://forums.debian.net/viewtopic.php?f=17&t=138817

 

It turns out that this solution actually really worked, now my laptop boots just fine and in fact I am writing this on my HP EliteBook. So at the end you were actually right by pointing me to the Debain User Forums and I will mark that post as the accepted answer.

 

With that, thank you for your help!

Re: booting windows

$
0
0

Your best bet for Linux support, since HP does not provide Linux support to consumers, not does it provide drivers, is to contact the support forum for the Linux distro you are trying to install   -- in this case, the Ubuntu Forums:  http://ubuntuforums.org/

 Folks there have experience using HP machines with Linux and know a lot about driver sources and installation issues.
 
Good Luck

Elitebook 840 G2 does not boot from NVMe; detected in OS; boot enabled

$
0
0

Hi, 

 

I removed the SATA SSD from my Elitebook 840 G2 (P4C18UC#ABA) and installed a Toshiba RC100 in the M.2 slot, but the drive does not appear as an available boot device. However, the drive is detected when booted into Windows (both, Windows Setup and Windows 10 off of the SATA drive).

 

boot_menu.jpg

 

boot_order.jpgm2_boot.jpgm2_enabled.jpgm2_drive.jpgwindows_drives.jpg

The plan is to put an HDD in the SATA slot for photos/videos, and run the OS and applications from the SSD. 

 

How can I get the laptop to boot from the M.2 drive correctly?

 

Thanks,

 

Chris

 

Re: Bios default password is unknown

Re: HP 15-ac129ds Laptop Boot Password

$
0
0

Halt Code 53139317 I need to reset my split x2

Bios password on notebook 14

$
0
0

Hello,

I'm facing (like as many people) to a bios problem, my OS crashed and when i go to the bios for activate usb key on boot, the bios is currently lock with a (forgotten) password... Can you help me ?

After 3 try, my hash code is [i 83991169]

thank you,

Rob'

Re: Bios password on notebook 14

$
0
0

 

Reboot and enter   14504526

 

REO


Laptop doesn't turn on

$
0
0

Hi,

I asked desperately for help. Today I changed Thermal Paste on my HP 15-r100nl and when i tried to turn it on after this change, it seems to be dead. When i push the power button, the power led and the network button LED turns on for 5 seconds and then turns off. Fan doesn't turn on and nothing seems to work. Do you have please any suggestion? I tried to remove the battery from the motherboard and wait for 3 minutes and then try another time but this doesn't help. Thank you in advance!

Laptop doesn't turn on

$
0
0

Hi,

I asked desperately for help. Today I changed Thermal Paste on my HP 15-r100nl and when i tried to turn it on after this change, it seems to be dead. When i push the power button, the power led and the network button LED turns on for 5 seconds and then turns off. Fan doesn't turn on and nothing seems to work. Do you have please any suggestion? I tried to remove the battery from the motherboard and wait for 3 minutes and then try another time but this doesn't help. Thank you in advance!

Re: Enter administrator password or Power on Password

$
0
0

I am unable to find an unlock code for this system disable code: i67433323. This is for an HP Stream 11 Pro G4 EE. HP chat support said that HP does not provide support for this. Thank you for any help you can give me.

Re: HP 15-ac129ds Laptop Boot Password

$
0
0

Halt Code 53139317 I need to reset my split x2

Re: Enter administrator password or Power on Password

$
0
0

I am unable to find an unlock code for this system disable code: i67433323. This is for an HP Stream 11 Pro G4 EE. HP chat support said that HP does not provide support for this. Thank you for any help you can give me.

Viewing all 131931 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>