70/5000
Thank you very much
This after I was told that only a board replacement would solve the problem
Thanks again
This after I was told that only a board replacement would solve the problem
Thanks again
Re: HP 250 g5 bios password reset[i 76533056]system disabled
↧
↧
Re: 100% Disk Usage on Two Desktops on Startup
Hi!
I understand you are getting 100% disk usage error on the PC.
Don't worry I'll try to help you out.
Did you make any software or hardware changes on your PC?
Excellent description and a great diagnosis done. It is greatly appreciated.
Please try the steps recommended below.
Type “task manager” in the Windows search bar and select Task Manager:
In the Processes tab, look at the % at the top of the Disk column. If it’s 100% (or it’s close and it has a red background), something is causing your hard disk to over-work.
On your keyboard, press the Windows logo key and X at the same time, then select Command Prompt (Admin).
Click Yes at the User Account Control window prompt.
A black window will display. This is the command prompt window. In this window, type in the following command:
net.exe stop "Windows search"
Hit Enter on your keyboard.
Disable SuperFetch
SuperFetch helps to decrease boot time and make must-load programs more efficiently. However, it has been identified as a potential cause of disk performance issues in Windows 8 and later versions of Windows, including Windows 10. Here’s how to stop this service:
1) On your keyboard, press Windows key and X at the same time, then choose Command Prompt (Admin).
2) Click Yes at the User Account Control prompt.
3) The command prompt will once again display. Type in the following command:
4) Hit Enter on your keyboard.
5) Wait for a few minutes to see if your computer starts performing better.
Also, try updating BIOS and chipset drivers on the PC and check if it helps.
Update the BIOS using this link. Click Here
Also, update the chipset drivers using this link. Click Here
Try running system diagnostics on your PC and check if the hardware components on your PC are functioning correctly.
Refer this article to know more information about running system diagnostics on your PC.
Hope to hear from you soon!
Have a great day! :-)
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
↧
Bios password
Hi!
I bought a second hand HP 2000 425NR and there is a BIOS password I cannot figure out. After a few attempts, it showed the error 'System Disabled, 88836059.' Is there any way I can get in? I really want to be able to control my PC's BIOS. As of now I can't even access the operating system.
Thank you,
Emmanuel
↧
Re: hp envy periodically freezes.
Welcome to the HP Support Community!
I assure you I will try my best to get this sorted.
I checked the failure ID you have shared, and it looks like the hard drive on the computer is gone bad and need replacement.
I recommend you contact HP phone support and check the available service options for your computer.
Here is how you can get in touch with the phone support.
1)Click on this link – www.hp.com/contacthp/
2)Select the product type.
3)Enter the serial number of your device or select let HP detect your product option.
4)Select the country from the drop-down.
5)You should see the HP phone support number or Chat option listed.
Let me know how it goes and you have a great day!
If you wish to show appreciation for my efforts, mark my post as Accept as Solution.Your feedback counts!
Cheers!
↧
Re: how to set up windos 10 in compaq presario cq 58 form bootable pendrive. its showing 3fo error.
You should first follow the instructions in this post to check Win10 compatibilty before forcing Win10 onto that PC: https://www.thewindowsclub.com/manually-run-windows-10-compatibility-appraiser
↧
↧
Re: Product information not valid
You are most welcome !
Sorry, I have no idea how you could obtain the correct details. These may be available in internal HP systems and can probably be seen by technicians, or if there is no specific information, some generic may be entered. No idea, sorry.
It's the technician in the service centers who are more familiar with these specifics.
↧
Re: Bios password
Hi:
Restart the PC, and enter this unlock passcode...37794099
↧
Re: Receiving System board (00A) - Product Serial Number message during POST
Dean the end user went to the local HP Service Provider and they were able to tatoo the serial number on the system board.
According to the the end user the HP Service Provider said the new serial number was tatoo on the system board but it needed to be program to recognize it. He could not specify any more what they did to resolve the issue.
The service provider charged the end user a diagnostic fee of about $50 to tatoo the system board which was a reasonable price the user was willing to pay.
I am not sure why the tatoo was not burn correctly when the system board was repalced but thanks to the local HP Service Provider the issue was resolved at a reasonable price.
Thank you for your assistance.
↧
Boot up loop
Hello, my HP Pavilion notebook is stuck in an infinite boot up. It starts up, windows logo appears, then it dissapears, then text saying "Recovering your windows" appears for a second and notebook reboots
↧
↧
Re: Product information not valid
Hi,
thank you for your effort!
BR
↧
Re: Bios Administraator Password
Thank you so much
↧
HP MINI 110 LAPTOP FATAL ERROR SYSTEM HALTED
HP MINI 110 LAPTOP FATAL ERROR SYSTEM HALTED .
Fatal Error CNU9521ZNZ
plz ANYbody SOLVE THAT PROBLEM.
↧
Re: HP MINI 110 LAPTOP FATAL ERROR SYSTEM HALTED
Hi:
See if restarting the PC, and entering this unlock passcode allows you to regain access to your PC.
e9loq73090
↧
↧
Re: Bios Administrator Password
You're very welcome.
↧
Re: PC stays on black screen after power up
Thank you for all the support so far! Sorry for adding more and more questions to the main topic, but when I look at the user guide I see that the HDD has some kind of cage where it stays, but the SSD is probably smaller, so how is it gonna fit properly? Oh and also I think the HDD just totally died. When I try to boot it it gives me a blue screen of death 2 times in a row saying CRITICAL PROCESS DIED.
↧
Re: Boot up loop
Hi:
The only suggestion I can offer would be to see if clean installing W10 allows the notebook to boot up and work normally.
You can make a W10 USB flash drive installer with the Microsoft Media Creation Tool, using an 8 GB flash drive using another Windows PC, if your PC is not working.
https://www.microsoft.com/en-us/software-download/windows10
If you are asked to enter a product key during the installation process, select the 'I don't have a product key' option, and W10 will install and automatically activate once you are connected to the internet.
Here are the steps to create the W10 USB flash drive installer...
- Select Download tool now, and select Run.
- If you agree to the license terms, select Accept.
- On the What do you want to do? page, select Create installation media for another PC, and then select Next.
Select the language, edition, and architecture (64-bit or 32-bit) for Windows 10. You want 64 bit.
- Select which media you want to use:
- USB flash drive. Plug in a blank USB flash drive with at least 8GB of space. Any content on the flash drive will be deleted.
After W10 installs, you can install the drivers and available software from your notebook's support page.
↧
Secure boot option in my notebook laptop not selectable (greyed out)
In my laptop.
UEFI Enabled
Secure boot option greyed out and not selectable
Please help me .
↧
↧
Re: PC stays on black screen after power up
I appreciate your efforts for writing back to us.
If you are installing a regular SSD on the PC. You need to install the SSD using a hard drive caddy.
You can search in google or any online computer store for 2.5 inches hard drive caddy.
Hope this answers your query!
Take Care! :)
↧
Re: PC stays on black screen after power up
Thanks for the explanation! Can you please send me an example link for Amazon?
↧
Re: PC stays on black screen after power up
You can use an optical drive hard drive caddy and connect the SSD to the laptop.
Please find the link for hard drive caddy from Amazon. Click Here
Hope this works!
Take Care! :)
↧
More Pages to Explore .....
