Hello
can i reset the admin bios password ?
The owner before me has set the password but forgett it .
Hello
can i reset the admin bios password ?
The owner before me has set the password but forgett it .
Welcome to the HP Support Community
For that model you will need to contact HP in your region and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password.
Phone >> http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
When talking to the HP rep ask them to escalate your service request.
Just to note:
Do not try removing the RTC battery. It will not remove the password, but it will reset the clock - as SMC files are time coded, a large disparity between the system clock and the time encoded in the SMC will cause it to fail.
REO
The product number is: 4BM05UA#ABA
My HP Stream 11 is giving me a BIOS code of [i 73145131]
Any suggestions?
Hello, I have password check failed, fatal error, system halted CNU949177Q please help. Thanks
Anytime.
Glad to have been of assistance.
Hi:
Restart the PC, and enter this unlock passcode...44758574
Hi:
Restart the PC and see if entering this unlock code works for you...
e9lovo3xx5
That worked. Thank you so much for your help!
You're very welcome.
Thank you so much for your reply. Are all letters in small caps.
You're very welcome.
Yes, all the characters are letters in lower case.
Am really grateful, let me try it out, will let u know the results
Sadly to say: Most of the time the 24 char failure id indicates the HDD is failing and it needs to be replaced. Is it still under warranty ? If Yes, please call HP for a replacement.
In the US:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
or HP technical support: 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Since your machine previously ran Windows 10, you can do a clean install W10 for free by using the media creation tool at the link below.
https://www.microsoft.com/en-us/software-download/windows10
The tool will allow you to make a bootable installation media (USB/DVD) and you can use installation media to install.
During the installation process if you are asked to enter a product key, check the 'Skip' box and W10 will install and then automatically activate once you are connected to the internet using the key embedded in BIOS of your machine.
Then you can install the drivers and available software you need from your PC's support page.
Regards.
So I was gaming and suddenly my computer shut off, can't turn it on. When I plug in the power cord the light gets orange. I already tried to take out the ac adapter and keep pressed the on button for 8, 15, 30 secs then connect the ac adapter again and nothing. I also noticed if I plug in the ac adapter the computer gets burning hot and I mean BURNING.
After a while when its not hot anymore, I press the power button without connecting the cord and the light from the power button gets white for like 8 seconds and then turns off but no booting no nothing just that light. Idk what to do anymore, idk if the computer is now useless or if its salvageable, if it overheated causing internal damage or if I should just let it breathe for like a day. Any help is welcome.
Hello Comunity,
i have a HP 250 G6. After i press the Power On Button i get the message "Enter Administrator Password or Power On Password".
After i try it three times without success i get the message System Disabled [i 50569963]
I hope you can help me.
Thanks in advance.
Reboot and enter 67336722
REO
I recently upgraded my ram with a Crucial 4 GB 2400 stick and installed a clean copy of windows on a M.2 SSD. Worked on the computer five days without issues, everything fine, the laptop was extremely responsive. Downloaded all the official drivers and updated my BIOS. Today I tried to start the Pc and all I got is a black screen and a Caps Lock blinking 3 times (slow) and the blinking five times (fast). Tried pushing the power button for 30 seconds and then pluging the power cord without success. I tried with the Windows key plus B or V and nothing. Some sites talk about a motherboard issue when the Caps Lock blinks five times. Is my MB dead? Is this a compatibility issue? Bios went nuts? Does my warranty covers this? My laptop is just 6 months old...
X360 14-ba001la is the model, came with a 4 GB 2400 stick and a 5400 rpm HDD. i3 7100u. Windows 10 64 Bits.
Welcome to the HP Forums!
Thank you for posting your query on this forum, it's a great place to find answers.
I reviewed your post and I understand that you want to know how to access BIOS on your computer.
Don’t worry, I assure you I will try my best to get this sorted.
If you want to boot using the USB flash drive, then you need to disable secure boot and enable legacy support in BIOS.
I recommend you follow the steps in the below article to disable secure boot.
https://support.hp.com/in-en/document/c04784866
Let me know how it goes and you have a great day!
If you wish to show appreciation for my efforts, mark my post as Accept as Solution.Your feedback counts!
Cheers!
Hi,
It's an HP Pavilion 14-bf008na running on Windows 10 (64-bit) and I think this is the SKU: 1UR77EA#ABU.
Thank you for any help you can give.