Quantcast
Channel: All Notebook Boot and Lockup posts
Viewing all 123426 articles
Browse latest View live

hp stream 14 system disabled i 77019534

0
0

 

hp stream 14-aax020wm

 

system disabled i 77019534

 

Thanks in advance


Re: hp stream 14 system disabled i 77019534

0
0

Hi:

 

Restart the PC, and enter this unlock passcode...40686971

Re: How to claim on warranty second hand laptop

0
0

 

Only HP can speak for what HP will do - those of us who do not work for HP can only speculate.

 

Speculation:

Depending on the model, the installed components, and vintage of your Zbook, even if HP does not cover the replacement, the repair might be worth the cost.  ZBooks do cost more initially - board replacement on an expensive workstation is something to at least consider as opposed to replacing a board on a $800 notebook.  Different animals.

 

Please contact HP Technical Support.

 

Reminders

  • Use the serial number of the device to submit the case (do not post that information here).
  • In those areas where Chat is an option, Chat service hours are likely restricted.
  • Chat is not available in every region.

 

In the event that Chat is not available in your region:  Call the number provided in the HP directory, else submit your case online (to receive phone contact information)

 

  • HP will advise you there is a fee for phone support and / or other services when your computer / device is no longer under warranty.  This is normal business practice.

 

  • HP may tell you that certain services are not covered under warranty.  This is normal business practice.  Standard Warranty typically covers specific hardware issues as explained in the Warranty contract. Care Pack coverage and warranties differ by package.

 

  • USA / Canada: HP displays regional contact information after you submit an online case.  Use the serial number of the device to submit the case to HP.

 

  

“Everywhere” Contact Information - HP Technical Support

 

Contact HP Support – Assistance Portal

 

HP World-Wide Support

 Select your region and follow the prompts

 

Option:  Contact HP Technical Support - Regions

 

USA / Canada

  1. Submit information / case online: HP Customer Support
  2. Sign in or continue as a guest

 

UK

  1. For faster support, submit information / case online HP Customer Support UK
  2. Contact Phone: Contact HP UK – Phone Assist

 

Contact HP Tech Support on your Browser

 

Open Browser to HP Technical Support

Select Contact Support or Business Support

  • Log in or continue as a Guest,
  • Follow the prompts.

 

Option - HP Support is on Facebook!

HP on Facebook

 

Option:  HP Agent Response on the Community Site

 

Choose to wait for an HP Agent to respond to your request on the community.

 

The following applies to HP agent response on our community:

  • An HP agent will always post back here before contacting you privately.
  • Agents are identified by the "HP" icon next to the Profile ID avatar.
  • HP Moderators are identified by the "Mod" icon next to the Profile ID avatar

 

  • HP agent response times vary widely – this community is not HP Technical Support
  • HP agent response on the community is NOT guaranteed
  • Be aware of scams and thieves that crawl out from under the rocks – READ the warnings

 

 

Thank you for participating in the HP Community Forum.

We are a world community of HP enthusiasts dedicated to supporting HP technology.

Click Thumbs Up on a post to say Thank You!

Answered? Click post "Accept as Solution"to help others find it.

 

 

 

 

Re: Windows hangs-up at the start-up

0
0
Hi,
I'm sorry to say but none of the suggested fixes worked for me.
Can I get a Windows7, 64bit DVD? or if you have an online download? Microsoft replyes that windows were installed by manufacturer.
Thanks,
IM

My laptop face recognition login software doesn't work

0
0

I bought my laptop in may 2018. The face recognition software on load up worked for several months and hasn't worked since.

 

I have updated it to the latest software. Removed and reinstalled the webcam from device manager but no changes.

 

HOw do i proceed?

 

Thanks Dan

BIOS Admin password

0
0

I need the password for the system disabled code "i 69900930" I've tried using password generators online but I wasn't getting anything that worked or fit. Any help would be greatly appreciated.

Re: BIOS Admin password

0
0

 

Reboot and enter   54595775

 

REO

Re: BIOS Admin password

0
0

Thank you for the swift response, I was able to gain access to my computer once again. Greatly appreciated


Re: Notebook doesn’t turn on / charge

0
0

 

Good Day. A warm welcome to the HP community. I reviewed the case regarding issues with the computer. I will be delighted to assist you here. 

 

Follow this link and try performing a hard reset. If that doesn't help, then it look's like a mechanical failure.

 

Please check the private message I've sent you with the details.

 

Good luck. :)

Re: BIOS Admin password

0
0

Your very welcome 

 

REO

System disabled

0
0

When powered on, says it needs administrator password, system disabled code: 99908334

Re: System disabled

0
0

Hi:

 

Restart the PC and enter this unlock passcode...26660910

Re: System disabled

Re: System disabled

0
0

You're very welcome.

Re: Envy not turn g on no charge light.

0
0

,

 

It looks like you were interacting with , but he is out for the day & I'll be glad to help you out, 
I'm the Jeet_Singh & I'm at your service. 

 

As you have mentioned in your post that the computer won't power on, so this looks like a possible hardware failure and I'm afraid Bios reset may not work.

 

As we diagnosed and found it is a hardware issue with the product. I will share you few details through a private message about the service options dedicated to your product, please watch your inbox for more information.

 

I hope this helps resolve this issue completely,

Regards,


Boot device not found

0
0

My grandson had been on my computer for a while & then the next time I went to start it up it says”Boot Device Not Found

15cw0994na boot device not found , install operating system

0
0

Tried system reset, failed to reset, then went to black screen stating that the operating system needs installed, I ain't got a back up, as it would let me back up either

Re: Changing bios settings gives annoying 4 pin code

0
0

Yes, but it has to do with HP working with Microsoft on Windows 10 security features.

Impossible to update BIOS on Hp Envy

0
0

I had an important update, i did it, everything was fine so i turned off the PC. The day after it asks me to update the BIOS i go for the update but after the reboot it ask me again for the update. I've tried again but everytime i turn on the pc it asks me to update the BIOS to 3.8.0.0 version. I'm stucked, i've  already tried to recover the BIOS via USB but it does not work. How can i fix this problem?

Thank you

Recovery (restoration) after hdd change not completed and looped

0
0

Good day!

The HDD on my HP ENVY 4-1256er died and I installed a new SSD with the same capacity into the computer. Then I booted from recovery flash (which I made long ago with HP tools) and in the recovery manager I chose system restore (reformat disk and full restore the system as it was from factory). The process began and took a long time, the computer rebooted several times and finally on a normally working windows it showed a window with message something like "Restoration was not complete" and the only buttons for show log or continue. In the log file I found 2 errors: p2pp burnboot check and some problem with USB-IF USB3.0 Hub.

If I pressed "Continue" button the process asked a restore device and did not see my flash.

After that I rebooted and windows was not loaded: the same message appeared that Restoration was not completed. And nothing I could do. Any reboot now finishes with this message.

(How can it be? I had seen a normally working Windows after restore, before it said restore was not complete)

And one more problem: now I cannot get into BIOS setup or change boot device options (so I cannot change boot device and boot from flash). When I switch on the computer and press Esc I got Startup Menu, but when I press F10 (Bios setup), F9 (Boot device options) the computer does not respond as usual and try to boot and show the same message Restoration is not complete. So I cannot do anything now.

Could you, please, help.

 

Viewing all 123426 articles
Browse latest View live




Latest Images