hello
notification light beside power cable plug in keeps turned on even aftyer shut down of pc...next time when iam trying to turn on pc ,i cant..that light is still on..i have to reemove battery..then light offs & then i am power on my pc
kundli help asap
this is happening for last 1 month
When I boot the laptop up and try to access the Bios settings I'm asked to enter the Administrator Password. After 3 wrong attempts I get the "System Disabled" message with code "i 85000193". Can you help me get the code to unlock the bios so I can have access to the settings. I need to enable lagacy support. Thank you for your help.
Jason
Mazzif's tool should work:
http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility
After many months of non-use have found my Stream 11 notebook throwing the dreaded "Enter Administrator Password or Power On Password" (would be interesting to know why this occurs even when not set by the user).
"System Disabled" code := [i 84567601]
Requesting matching password. Assistance in this matter is appreciated.
Hi,
I opened the laptop by power button the fan starts, wifi-led is lit, power button led is lit and caps lock key blinks continously but the display is not shown. I have tried taking out the battery and then adding it again, but nothing works.
please help, as I have some important data with no backup
Hi Tzeen,
Please find steps that i shared below;
- Unplug all usb devices,battery and power cord.
- Press and Hold "Power Button" for 30 sec.
- After that, Plug battery and power cord in again.
- Power on again and check status of your device.
If problem persist, Most probably your device has bios corruption issue.
Please find steps that i shared about bios rollback below;
Thanks,
Hi,
Usually continuous blinking of of led indicates a motherboard failure. You can try a power reset
https://support.hp.com/ph-en/document/c01684768
however most likely you will need to take to a technician and see if anything can be done.
In the meantime you can remove the hard drive and either attach internally in desktop or use a USB to SATA adapter and this way recover your important files on another computer.
On page 51 of service manual you cam see how to remove the drive:
http://h10032.www1.hp.com/ctg/Manual/c03137358
Example:
Hope it helps,
David
Please click on thumbs up for thanks
Please click on accept as solution if answered your question
Welcome to the HP Support Community
Reboot and enter 13336044
REO
Hi
As it takes several hours for piccies to be approved, and you haven't given any indication of any remedial action, I can only give loose suggestions.
First:- Turn off the computer, press and hold the PWR button for 4 seconds.
Then - Leave only keyboard and mouse connected, disconnect all externally connected
devices such as Docking Station, USB storage devices, displays, and printers.
Unplug the AC adapter from the computer.
Next - Press and Hold the Power button for 15 seconds to Hard Reset.
AND/OR - Power on your PC, press Esc (repeatedly), then F2 at the prompt.
Choose System Tests (Fast Test does a 4 minute hardware check).
AND/OR - Windows Logo key + Ctrl + Shift + B
AND/OR - If you’re using multiple displays, try projecting video to a different monitor.
Press the Windows Logo key + P, select a display, and then press Enter.
Hey there, I've been working on this for a while now, it appears the laptop I've been working on has been locked, and we can't get it open. I've tried the bios password generating website with no success. Code that comes up on the computer is [i 57270148] however any unlock key that comes out of the website does not work. I've also tried removing the CMOS battery with no progress being made. Any help?
Welcome to the HP Support Community
Reboot and enter 60825507
REO
Make a CMOS reset while the battery is removed. There are so many videos on YouTube.
You are genius.....
Your very welcome
Removing the CMOS/RTC battery on newer laptops will not work like it used to!!
REO
I was installing BIOS update and it froze, I waited for it some days but the progress bar didn't seem to move, I disconnected it from the electricity and took out the battery. When I booted it I started to her the vent, but screen was still black. I tried meta+B and meta+V, but still nothing happened. I'm afraid I destroyed the laptop, are there any steps to repair it? Will removing the CMOS battery help me?
Hi,
I have contacted Customer Support and they were kind to provide me a custimized SMC.BIN.
Unfortunatelly this bin does not work - after laptop starts with WIN+Arrow_down+Arrow_up nothing happens - there is only black screen, fan is turning on and after serveral minutes laptop proceeeds with OS boot.
Password is still on BIOS. Customer Service informed me that motherboard is damaged (?), but because machine has expired warranty, all they can do is a paid rapair.
OK if I have put password on this laptop this would be understandible - my fault , I have to pay for this forgot password.
But in my case there was no passwordset up by me. I have used official BIOS from hp site and this BIOS set this password on my machine - why should I pay not for my fault. Even on newest BIOS there is infromation that ""Fixes an issue which causes the administrator password to be requested by the system when the -p command is used to flash the BIOS."" - so hp engieneers are aware that they have messed something. Really I don't know what to think about this situation, but it seems to be really unfair to put responsibility on customer in such situtation.
Hi:
Restart the PC, and enter this unlock passcode...12695532
Hi,
I have a HP ProBook 450 G3 and my memory test came back with a
Failure ID - PLR37L-7RN9G2-MFPX61-C09603
Product ID - T1B78UT#ABA.
Can someone please tell me what this mean?
Thanks,
Don't the batteries need to be charged up?
