I just bought a refurbished HP Elitex2 1012 G2 and it's LED light just flashes amber twice when I attempted to boot it up. I left it to charge for about 6 hours, but nothing changed. The screen I black, there is no sound coming. Please reply as soon as possible.
HP Elite x2 1012 G2 does not power on. It's LED light flashes Amber twice before disappearing.
↧
↧
The HDD test passed but the memory test won't run at all
I keep getting a blue screen whenever i turn on my HP pavilion laptop, sometime it get stuck st the HP logo. Itried running the HDD test and it passed but the Memory test won't run or move?
↧
Can't get to UEFI boot only on Legacy Support
My laptop can't boot in UEFI mode only on Legacy Support, if i change it anyway to UEFI the laptop will show the "Boot Device Not Found" if i started the laptop. Guys can you help me how to change the boot from Legacy Support (BIOS) to UEFI ?. I dont know whether the Windows installation is in uefi mode or bios mode because i send my laptop to repair shop before this. I got so many virus that eventually prevent my laptop from running on my laptop before & the technician says that i should format my laptop & do clean windows installations so i accept it. After that, everything is fine except the boot mode issue. I want it back to UEFI rather than BIOS because my laptop a bit slow than usual. I heard that if you OS is windows 10, you can change it easily for like 3 second in the MBR2GPT?.. or is there other save method ?
↧
BIOS Password
System disabled i 70989060
↧
Re: BIOS Password
Welcome to the HP Support Community
Reboot and enter 47516425
REO
↧
↧
Re: Bios Password? I'm stuck
Welcome to the HP Support Community
Reboot and enter 67349967
REO
↧
Hard drive test failed
Failure I'd RU60Q87A49B9MFPV7F60RM03 is what I got when I ran the test I'm not sure what this means and my hp is out of warranty. Someone please help. I also got a product I'd number G6R14UA#ABA. Thank you
↧
Re: Hard drive test failed
Sadly to say: Most of the time the 24 char failure id indicates the HDD is failing and it needs to be replaced. Is it still under warranty ? If Yes, please call HP for a replacement.
In the US:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
or HP technical support: 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
For Windows 10, you can do a clean install W10 for free by using the media creation tool at the link below.
https://www.microsoft.com/en-us/software-download/windows10
The tool will allow you to make a bootable installation media (USB/DVD) and you can use installation media to install.
During the installation process if you are asked to enter a product key, check the 'Skip' box and W10 will install and then automatically activate once you are connected to the internet using the key embedded in BIOS of your machine.
Then you can install the drivers and available software you need from your PC's support page.
Regards.
↧
When I start up my laptop it says “an operating system wasn’t found. Try disconnecting any drives...
Every time u try to start up my computer it says “an operating system wasn’t found. Try disconnecting any drives that don’t contain an operating system.”
Then it says press crtl+alt+del to restart but every time I try to restart nothing happens
↧
↧
System disabled I 633721501
Windows ten start up get stuck on administration password click 3 times says system disabled I 633721501
↧
Re: System disabled I 633721501
Welcome to the HP Support Community
Please recheck your code???
REO
↧
Re: System disabled I 633721501
I 63372150 sorry about that
↧
Re: System disabled I 633721501
No problem
Reboot and enter 54923515
REO
↧
↧
HP ProBook 440 G4 boot warning: system not fully configured
Upon booting up, system immediately displays a warning message that states the system is not fully configured. I am asked to contact HP support. Then the message disappears, the system continues to boot normally, and seems to operate normally.
This problem has appeared at least twice in the forum for other HP systems, and was in each case reported solved by running sssm.bat (apparently found in the wndmit folder of NbDmiFit). Apparently I need to get HP to run this proposed solution.
Anyone able to help me out with this?
↧
Re: System disabled I 633721501
Thanks you so much for your time
↧
Re: When I start up my laptop it says “an operating system wasn’t found. Try disconnecting any drive
Sounds like the hard drive has failed and will need to be replaced. If you were still in warranty HP would replace it. If not a retail 2.5" laptop SATA hard drive can be used-Western Digital,Seagate,Toshiba,etc
Just be sure to get one of at least equal capacity as the original in order to use HP Recovery Media to install Windows. It can be larger, but not smaller capacity.For instance you have a 500GB hdd now so you could use a 750GB hdd but not a 320GB hdd.
Maintenance and Service Guide shows how to replace it:
Example:
↧
Re: System disabled I 633721501
Your very welcome
REO
↧
↧
Re: HP ProBook 440 G4 boot warning: system not fully configured
NbDmiFit is a utility only available to HP Tech Support or HP ASP. You will need to contact HP for help with this:
↧
Re: delete encryption device
yes, i can reach the desctope succsessfully, so i guese OS was insaled right. the old password are not able any more. but i may load windows throw bios.
may you please send me link for version of this HP Client Secutity, becouse the last one does not have this option (Drive Security)
thanks
↧
Forgot BIOS administrator password
Hello,
I forgot the BIOS administrator password.
My laptop is a HP Probook 6550b.
Please help!
Kind regards,
Daniel
PS When starting up the laptop (during boot session) on the upper side of the screen i see the message S167132 (maybe this helps).
↧
More Pages to Explore .....
